Controlled pressure cleaning for patios, paths, pool surrounds, and paved areas.
The right pressure for the surface, every time.
Send through your details and I'll get back to you shortly.
Only your name and phone are required, but the more you share, the faster and more accurate your quote will be.
Pressure cleaning is what I use on hard surfaces around your home that a soft wash isn't suited to: patios, paths, pool surrounds, courtyards, and general paved areas. I adjust pressure and technique to the surface so it comes up clean without damage.
Brisbane's humidity and rain make paved areas prone to algae, mould, and grime build-up, which gets slippery and looks tired fast. A proper pressure clean lifts that build-up and freshens up the whole outdoor area.
Shaded patios and pool surrounds build up green algae and black mould that make surfaces slippery.
Tyre marks and general grime build up on driveways, paths, and courtyards over time.
Clean paths and paved areas lift the whole property, especially combined with a house wash.
Some rust and deep tannin staining is permanent. I'll point out anything that won't fully come out before I start.
I check the surface type, condition, and access from photos before quoting.
Heavy grime and staining get a pre-treatment before the main clean.
Controlled pressure cleans the surface evenly, including edges and joins.
A final rinse leaves the area clean, with completion photos sent through.
Got a driveway specifically? See dedicated Driveway Cleaning. Sandstone or natural stone? See Sandstone Cleaning for the gentler method that surface needs.
See the difference controlled pressure cleaning makes to paved areas around Brisbane.
Every area is different. Send a photo for an exact price.
Path / Small Patio
Patio, Courtyard, or Pool Area
Large Paved Areas / Bundled Jobs
Prices are estimates based on standard area sizes. Heavy staining or difficult access may vary the final price.
You deal directly with me, the owner, on every job from quote to completion.
I adjust pressure and technique so the surface gets clean without damage or striping.
Fully insured and based in Brisbane, servicing the surrounding areas too.
I need access to an outdoor tap. My equipment doesn't rely on your power supply, so that's usually all that's required.
Done properly, no. I adjust pressure and technique to suit the surface. Damage or striping usually comes from a nozzle held too close for too long, which I avoid by keeping even, controlled passes.
I use controlled pressure and adjust my technique so grout lines aren't stripped out. On fragile or sandy grout, I lower the pressure and rely more on pre-treatment instead.
I can treat grease and rust stains to lighten them significantly. Older or deeply set stains may not come out completely, but treatment usually makes a big difference.
Shaded, damp areas can show regrowth within months. A post-treatment add-on can slow this down, and I'm happy to talk through the options when I'm on site.
Yes. I follow current local water restrictions and schedule or adjust my methods accordingly, so this doesn't hold up your job.
